Units of Sale This 45mm kevlar braid is sold by...
Units of Sale
This 45mm kevlar braid is sold by the linear metre (with the braid at its natural 45° orientation) in a continuous length. For example; if you purchase a quantity of '5' you will receive a continuous length of braid 5m long. There is no minimum order quantity but several volume discounts are available for larger quantities.
|10||£ 3.12||Up to £ 5.20|
|20||£ 2.60||Up to £ 20.80|
Warning: Last items in stock!
Kevlar seam tape is a flat braid made from genuine Kevlar 49 fibre woven in such a way that the braid is 'flat', i.e. it is not a tube/sleeve but instead resembles a densely woven tape. The fibre orientation of the tape is /- 45 degrees which means that the braid is ideally suited to handling torsional loads, affords excellent conformity (drape) without buckling the fibres and resists crack propagation.
Kevlar Flat Braid is used as a very high strength tape for joining composite panels or protecting joins in composite panels, most commonly around the seam of kayaks, canoes and other small boats.
Kevlar Flat Braid is compatible with all conventional resin systems including polyester, vinylester and epoxy resin. Most commonly, the braid is applied to the outside seam of canoes and kayaks so completely overlap the join between the upper and lower hull mouldings. The braid is then simply wet-out with epoxy resin and then once cured, overpainted once more with another coat of epoxy resin to create an extremely tough, durable and protective join.
No customer reviews for the moment.