Moulds can be made from a wide variety of materials and in a number of ways but moulds for advanced composites need to be compatible with the resin system and curing process they will be used for.
Box of powder free blue 100 Nitrile gloves suitable for protecting your hands during a wide range of composites tasks. Wear these extra strong nitrile gloves when wet-lay laminating, performing a resin infusion, handling pre-preg, mixing and pouring polyurethane casting resin or spraying paint or lacquer.
Product Description This soft yellow filling wax is extremely useful in pattern making and mould making where it can be used as a better alternative to plasticine for filleting, filling the gaps between sheets of sheetwax and general void filling or shaping purposes.
Product Description This high temperature sheet wax is ideally suited for a wide range of tooling and mould making applications where a material thickness difference is needed between a pattern and a mould (for example if you wanted to make a snug fitting cover for a part) or a mould and another mould (if you were creating a 'matched mould').
Product Description EG160 high temperature tooling gelcoat is an advanced epoxy gelcoat designed primarily for use in the production of high temperature moulds/tools for prepreg and resin infusion. EG160 uses a unique unfilled formulation which results in superior surface finish and polishability whilst still achieving excellent stability at service...
Product Description S120 is a remarkable new generation of high performance board sealer recommended for the sealing and restoring of epoxy and polyurethane model/tooling board and composite moulds. S120 can transform machined-finish tooling board into a hard-wearing high-gloss finish pattern or mould in just a few applications.