A range of high quality polyester and vinylester based resin systems for use in pattern and mould making, as well as laminating and gelcoating of finished parts.
Product Description Polyester and vinylester gelcoats are designed so that they do not cure properly or fully where they are exposed to air. When used as a first layer into a mould this ensures that the inside surface of the gelcoat remains slightly tacky and uncured ready to crosslink properly with the resin matrix of the main reinforcement.
Product Description IP2 is a cost-effective high quality isophthalic polyester resin for vacuum resin infusion. IP2 is ideal for infusion of composite parts such as high-end fibreglass bodykits, canoes, kayaks, boat hulls etc. IP2 is pre-accelerated so requires no cobalt and is catalysed using standard MEKP catalyst.
Product Description Carbon Makers' GC50 Epoxy Compatible Gelcoat is a very special type of polyester gelcoat designed specifically for use with epoxy based wet-lay or resin infused laminates in place of an epoxy gelcoat or post-production paint/lacquer.